HP DL360 ProLiant DL360 Generation 3 Server Maintenance and Service Guide - Page 17

Removing the Server from the Rack, Rear Unit Identification LED switch

Get HP DL360 - ProLiant - G3 PDF manuals and user guides
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

Removal and Replacement Procedures 4. At the rear of the server, locate the illuminated Rear Unit Identification LED switch that identifies the server being serviced. Figure 2-2: Rear Unit Identification LED switch 5. Disconnect power cord(s). Removing the Server from the Rack To remove the server from the rack: 1. If the server has a sliding rail solution: a. Disconnect all remaining cables from the server rear panel (including cables extending from expansion boards). b. Loosen the thumbscrews securing the server to the rack. c. Slide the server out of the rack until the rail locks engage. d. Press and hold the rail locks, extend the server until it clears the rack. 2. If the server has a universal rail solution: a. Disconnect all remaining cables from the server rear panel (including cables extending from expansion boards), moving from left to right. 2-6 HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Introv-ERTL Part Number: 293948-005 Last Saved On: 2/27/04 2:49 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Removal and Replacement Procedures
4.
At the rear of the server, locate the illuminated Rear Unit Identification LED switch that
identifies the server being serviced.
Figure 2-2:
Rear Unit Identification LED switch
5. Disconnect power cord(s).
Removing the Server from the Rack
To remove the server from the rack:
1.
If the server has a sliding rail solution:
a.
Disconnect all remaining cables from the server rear panel (including cables
extending from expansion boards).
b.
Loosen the thumbscrews securing the server to the rack.
c.
Slide the server out of the rack until the rail locks engage.
d.
Press and hold the rail locks, extend the server until it clears the rack.
2.
If the server has a universal rail solution:
a.
Disconnect all remaining cables from the server rear panel (including cables
extending from expansion boards), moving from left to right.
2-6
HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide
HP CONFIDENTIAL
Codename: Introv-ERTL Part Number: 293948-005 Last Saved On: 2/27/04 2:49 PM