HP DL360 ProLiant DL360 Generation 3 Server Maintenance and Service Guide - Page 68
Debug LED Switch (SW3) Settings, Clearing and Resetting System Password Settings, Table 5-6
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
LEDs, Switches, and Jumpers Debug LED Switch (SW3) Settings The Debug LED switch (SW3) is a four-position switch used for system maintenance. S1 and S2 function as a pair. The default positions on this switch are Off and Reserved, and they are not modified by the user. Table 5-6 shows the configurations of SW3. Table 5-6: Debug LED Switch (SW3) Settings Position S1/S2 Function Debug LED switch S3 Reserved S4 Reserved Setting Off/Off Off/On On/Off On/On Off Off Description Port 84 SmartArray 5i diagnostic LEDs iLO diagnostic LEDs Port 84 Reserved Reserved Clearing and Resetting System Password Settings It may be necessary to clear and reset the system password. IMPORTANT: This method of clearing and resetting system passwords is necessary only if the current password is not known. Otherwise, when prompted, the password can be entered followed by a forward slash (/). This operation removes the current password and allows one of the following to be performed: • Enter the RBSU and set the password to a new value. • Leave the password value blank to disable the password feature. When the system switch position S5 is set to the On position, the system is prepared to clear the system password. 1. Power down the server. 2. Set the switch at position 5 to the On position. 3. Restart the server, and wait for confirmation. 4. Power down the server. 5. Set the switch at position 5 to the default Off position. 6. Restart the server. The password is cleared. HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide 5-7 HP CONFIDENTIAL Codename: Introv-ERTL Part Number: 293948-005 Last Saved On: 2/27/04 2:56 PM