HP DL360 ProLiant DL360 Generation 3 Server Maintenance and Service Guide - Page 45
Processors, Processor and PPM socket locations, Table 2-3, Processor and PPM Sockets
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Removal and Replacement Procedures Processors This server can support up to two processors. Each processor has an associated processor power module (PPM) that must be present for proper operation of the server. Figure 2-38: Processor and PPM socket locations Table 2-3: Processor and PPM Sockets Item Description 1 PPM socket 1 (must always be populated) 2 Processor socket 1 (must always be populated) 3 Processor socket 2 4 PPM socket 2 Note: A PPM must be installed when a new processor is installed. WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching. CAUTION: Processor socket 1 must be populated at all times. Failure to follow this process results in the system failing to boot and halting during the Power-On Self-Test (POST). This error will result in the system not functioning properly. 2-34 HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Introv-ERTL Part Number: 293948-005 Last Saved On: 2/27/04 2:49 PM