HP Dv6910us HP Pavilion dv6500, dv6600, and dv6700 Entertainment PCs - Mainten - Page 92
Disconnect the power connector cable, down with the expansion port 3 toward you.
UPC - 884420154020
View all HP Dv6910us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
3. Use the optical drive connector (1) to lift the right side of the system board (2) until it rests at an angle. 4. Disconnect the audio board cable (3) from the system board. 5. Release the system board (4) by sliding it to the right until the connectors on the left side of the system board disengage from the base enclosure. 6. Remove the system board. 7. If it is necessary to replace the USB/power connector board cable, turn the system board upside down with the expansion port 3 toward you. 8. Disconnect the power connector cable (1) and the USB board cable (2) from the system board. The USB/power connector board cable is included in the Cable Kit, spare part number 446519-001. Reverse the above procedure to install the system board and USB/power connector board cable. 84 Chapter 4 Removal and replacement procedures