HP LaserJet Enterprise MFP M630 User Guide 1 - Page 166
Clear jams in the duplexer and fuser, reconnect it and restart the product after clearing
View all HP LaserJet Enterprise MFP M630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Clear jams in the duplexer and fuser The following information describes how to clear a paper jam in the duplexer or fuser area. When a jam occurs, the control panel displays an animation that assists in clearing the jam. 1. M630dn, M630h, and M630f: Pull the output bin and bezel straight out, and then lift up to remove them. 2. M630z (or other models if the stapling mailbox is installed): Press the button to release the stapling mailbox, and remove it from the product. CAUTION: Do not disconnect the connector. The cord is long enough to set the stapling mailbox on the floor. If the connector is disconnected, reconnect it and restart the product after clearing the jam so the product recognizes the accessory. 3. Slide the duplexer away from the product to remove it. 154 Chapter 9 Solve problems ENWW