HP LaserJet Enterprise MFP M630 User Guide 1 - Page 188
Calibrate the scanner, Device Maintenance, Calibration/Cleaning
View all HP LaserJet Enterprise MFP M630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
2. Open the scanner lid. 3. Clean the scanner glass, the document feeder strips, and the white plastic backing with a soft cloth or sponge that has been moistened with nonabrasive glass cleaner. CAUTION: Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon tetrachloride on any part of the product; these can damage the product. Do not place liquids directly on the glass or platen. They might seep and damage the product. NOTE: If you are having trouble with streaks on copies when you are using the document feeder, be sure to clean the small strip of glass on the left side of the scanner. 4. Dry the glass and white plastic parts with a chamois or a cellulose sponge to prevent spotting. 5. Connect the power cable to an outlet, and then press the power button to turn the product on. Calibrate the scanner If the copied image is not positioned correctly on the page, follow these steps to calibrate the scanner. NOTE: When using the document feeder, make sure to adjust the guides in the input tray so they are against the original document. 1. From the Home screen on the product control panel, scroll to and touch the Device Maintenance button. 2. Open the following menus: ● Calibration/Cleaning ● Calibrate Scanner 176 Chapter 9 Solve problems ENWW