HP LaserJet Pro CM1415 HP LaserJet Pro CM1410 - User Guide - Page 178
Start Fax, Standard, support/CM1410series, Private Receive, Service, Fax Service
View all HP LaserJet Pro CM1415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
Control panel message Fax Send error. Fax storage is full. Canceling the fax receive. Fax storage is full. Canceling the fax receive. Fax storage is full. Canceling the fax send. Description Recommended action An error occurred while trying to send a fax. Try resending the fax. Try faxing to another fax number. Check for a dial tone on the phone line by touching the Start Fax button. Check that the telephone cord is securely connected by unplugging and replugging the cord. Make sure that you are using the telephone cord that came with the product. Make sure that the phone is working by disconnecting the product, plugging in a telephone to the phone line, and making a voice call. Connect the product to a different phone line. Set the fax resolution to Standard instead of the default of Fine. If the error persists, contact HP. See www.hp.com/support/CM1410series or the support flyer that came in the product box. During the fax transmission, the product ran out of memory. Only the pages that fit into memory will be printed. Print all of the faxes, and then have the sender resend the fax. Have the sender divide the fax job into multiple jobs before resending. Cancel all fax jobs or clear the faxes from memory. The amount of available memory for storing If you are using the Private Receive feature, faxes is insufficient to store an incoming fax. print all received faxes to regain some memory. If you still need more memory, clear faxes from memory. Open the Service menu. In the Fax Service menu, select the Clear Saved Faxes option. During the fax job, the memory filled. All pages of the fax have to be in memory for a fax job to work correctly. Only the pages that fit into memory were sent. Cancel the current job. Turn the product off, and then turn it on again. Try sending the job again. If the error reoccurs, cancel the job and turn the product off and then on a second time. The product might not have enough memory for some jobs. 162 Chapter 11 Fax ENWW