HP LaserJet Pro CM1415 HP LaserJet Pro CM1410 - User Guide - Page 183

3. Touch the Fax Reports button. 4. Touch the name of the report that you want to print. Set the fax error report A fax error report is a brief report that indicates the product experienced a fax job error. You can set it to print after the following events: ● Every fax error (the factory-set default) ● Send fax error ● Receive fax error ● Never NOTE: With this option, you will have no indication that a fax failed to be transmitted unless you print a fax activity log. 1. From the Home screen, touch the Fax button. 2. Touch the Fax Menu button. 3. Touch the Fax Reports button. 4. Touch the Fax Error Report button, and then touch the printing option that you want to use. Change error correction and fax speed Set the fax-error-correction mode Usually, the product monitors the signals on the telephone line while it is sending or receiving a fax. If the product detects an error during the transmission and the error-correction setting is On, the product can request that the portion of the fax be resent. The factory-set default for error correction is On. You should turn off error correction only if you are having trouble sending or receiving a fax, and you are willing to accept the errors in the transmission. Turning off the setting might be useful when you are trying to send a fax overseas or receive one from overseas, or if you are using a satellite telephone connection. 1. From the Home screen, touch the Setup button. 2. Touch the Service menu. 3. Touch the Fax Service menu. 4. Touch the Error Correction button, and then touch the On button. Change the fax speed The fax-speed setting is the modem protocol that the product uses to send faxes. It is the worldwide standard for full-duplex modems that send and receive data across telephone lines at up to 33,600 bits per second (bps). The factory-set default for the fax-speed setting is Fast(V.34). ENWW Solve fax problems 167