HP Mini CQ10-100 Compaq Mini CQ10 Notebook PC - Maintenance and Service Guide - Page 51
and remove the 2 Phillips PM2.0×3.0 screws, To remove the hard drive
View all HP Mini CQ10-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Mass storage devices NOTE: Each hard drive spare part kit includes a cable and bracket. Description Hard drive 160 GB, 5400 RPM Hard drive mounting kit Spare part number 594809-001 537641-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35). 5. If your computer has WWAN capability, remove the SIM (see SIM on page 36). 6. Remove the keyboard (see Keyboard on page 39). To remove the hard drive: 1. Loosen the Phillips PM2.5×10.0 captive screw (1), and remove the 2 Phillips PM2.0×3.0 screws (2) that secure the assembly to the computer. 2. Use the Mylar tab to slide the assembly to the left (3) to disconnect it, and remove the assembly (4). Continue with one of the following sections for hard drive or solid-state drive replacement. Component replacement procedures 43