HP Mini CQ10-100 Compaq Mini CQ10 Notebook PC - Maintenance and Service Guide - Page 58

Remove the 2 Phillips PM2.0×3.0 screws

Get HP Mini CQ10-100 - PC PDF manuals and user guides View all HP Mini CQ10-100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

5. If your computer has WWAN capability, remove the SIM (see SIM on page 36). 6. Remove the following components: a. Keyboard (see Keyboard on page 39) b. Hard drive (see Mass storage devices on page 43) c. Top cover (see Top cover on page 45) Remove the WLAN module: 1. Remove the 2 Phillips PM2.0×3.0 screws (1) that secure the WLAN module to the system board. (The edge of the module opposite the slot rises away from the computer.) 2. Disconnect the wireless antenna cables (2) from the terminals on the WLAN module. 3. Remove the WLAN module (3) by pulling the module away from the slot at an angle. Reverse this procedure to install the WLAN module. 50 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
5.
If your computer has WWAN capability, remove the SIM (see
SIM
on page
36
).
6.
Remove the following components:
a.
Keyboard (see
Keyboard
on page
39
)
b.
Hard drive (see
Mass storage devices
on page
43
)
c.
Top cover (see
Top cover
on page
45
)
Remove the WLAN module:
1.
Remove the 2 Phillips PM2.0×3.0 screws
(1)
that secure the WLAN module to the system board.
(The edge of the module opposite the slot rises away from the computer.)
2.
Disconnect the wireless antenna cables
(2)
from the terminals on the WLAN module.
3.
Remove the WLAN module
(3)
by pulling the module away from the slot at an angle.
Reverse this procedure to install the WLAN module.
50
Chapter 4
Removal and replacement procedures