HP Mini CQ10-100 Compaq Mini CQ10 Notebook PC - Maintenance and Service Guide - Page 68
Remove the 2 Phillips PM1.6×2.0 screws, that secure the actuators for the power switch
View all HP Mini CQ10-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
2. Disconnect the following cables from the system board: (2) Display panel cable (3) Microphone cable (4) Speaker cable (5) WLAN cables (6) WWAN cables (select models only) 3. Remove the 2 Phillips PM1.6×2.0 screws (1) that secure the actuators for the power switch and wireless on/off switch to the system board. 4. Remove the actuators (2). 60 Chapter 4 Removal and replacement procedures
2.
Disconnect the following cables from the system board:
(2)
Display panel cable
(3)
Microphone cable
(4)
Speaker cable
(5)
WLAN cables
(6)
WWAN cables (select models only)
3.
Remove the 2 Phillips PM1.6×2.0 screws
(1)
that secure the actuators for the power switch and
wireless on/off switch to the system board.
4.
Remove the actuators
(2)
.
60
Chapter 4
Removal and replacement procedures