HP Mini CQ10-100 Compaq Mini CQ10 Notebook PC - Maintenance and Service Guide - Page 61
USB/audio board
View all HP Mini CQ10-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
USB/audio board Description USB/audio board (includes cable) Spare part number 600124-001 Before removing the USB/audio board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC Adapter from the computer. 4. Remove the battery (see Battery on page 35). 5. If your computer has WWAN capability, remove the SIM (see SIM on page 36). 6. Remove the following components: a. Keyboard (see Keyboard on page 39). b. Hard drive (see Mass storage devices on page 43). c. Top cover (see Top cover on page 45). Remove the USB board: 1. Release the ZIF connector (1) to which the USB/audio board cable is connected, and disconnect the cable (2). 2. Release the USB/audio board from the clip attached to the base enclosure (3), and remove the USB/audio board (4). Reverse this procedure to install the USB/audio board. Component replacement procedures 53