HP Mini CQ10-100 Compaq Mini CQ10 Notebook PC - Maintenance and Service Guide - Page 67
System board, When replacing the system board
View all HP Mini CQ10-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
System board Description System board (includes processor and replacement thermal material) ● Intel Atom N270 1.6-GHz processor, 512-KB Level 2 cache, 533-MHz front-side bus (FSB) ● Intel Atom N270 1.6-GHz processor, 512-KB Level 2 cache, 533-MHz front-side bus (FSB) for use with WWAN option Spare part number 594804-001 599187-001 Before removing the system board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35). 5. If your computer has WWAN capability, remove the SIM (see SIM on page 36). 6. Remove the following components: a. Keyboard (see Keyboard on page 39) b. Hard drive (see Mass storage devices on page 43) c. Top cover (see Top cover on page 45) When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● WLAN module (see WLAN module on page 48) ● WWAN module, if included (see WWAN module on page 51) ● RTC battery (see RTC battery on page 42) ● Heat sink assembly (see Heat sink assembly on page 57) Remove the system board: 1. Release the tape securing the WWAN antennas (1). Component replacement procedures 59