HP Mini CQ10-100 Compaq Mini CQ10 Notebook PC - Maintenance and Service Guide - Page 65
Heat sink assembly, Remove the 4 Phillips PM1.6×2.5 screws
View all HP Mini CQ10-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Heat sink assembly Description Heat sink assembly (includes replacement thermal material) Spare part number 537619-001 Before removing the heat sink assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 35). 5. If your computer has WWAN capability, remove the SIM (see SIM on page 36). 6. Remove the following components: a. Keyboard (see Keyboard on page 39) b. Hard drive (see Mass storage devices on page 43) c. Top cover (see Top cover on page 45) d. WLAN module (see WLAN module on page 48) e. Fan (see Fan on page 55) Remove the heat sink assembly: 1. Remove the 4 Phillips PM1.6×2.5 screws (1) that secure the heat sink assembly to the system board. NOTE: The screws are numbered 1 through 4. Follow this order when removing the screws. Component replacement procedures 57