HP PageWide 377 User Guide - Page 154

Print individual fax reports 1. Open the control panel dashboard (swipe the dashboard tab at the top of any screen downward, or touch the dashboard area on the home screen). 2. On the control panel dashboard, touch . 3. Touch Reports , and then touch Fax Reports. 4. Touch the name of the report that you want to print. Set the fax error report A fax error report is a brief report that indicates the product experienced a fax job error. You can set it to print after the following events: ● Every fax error (the factory-set default) ● Send fax error ● Receive fax error ● Never NOTE: With this option, you will have no indication that a fax failed to be transmitted unless you print a fax activity log. For instructions, see Information pages. 1. On the control panel, touch the Fax application folder. 2. In the display, touch the Fax Setup icon. 3. Touch Reports , and then touch Fax Error Reports. 4. Touch to select one of the following. On (Fax Send) On (Fax Receive) On (Fax Send and Fax Receive) Off Prints whenever a transmission error occurs. This is the default setting. Prints whenever a receiving error occurs. Prints whenever a fax error occurs. Does not print any fax error reports. Fax error messages Alert and warning messages appear temporarily and might require you to acknowledge the message by touching the OK button to resume or by touching a cancel button to cancel the job. With certain warnings, the job might not complete or the print quality might be affected. If the alert or warning message is related to printing and the auto-continue feature is on, the product will attempt to resume printing the job after the warning has appeared for 10 seconds without acknowledgement. Communication error. Description A fax communication error occurred between the product and the sender or receiver. 138 Chapter 9 Solve problems ENWW