HP Pro SFF 280 G9 Desktop PC Maintenance and Service Guide - Page 31
Front bezel
View all HP Pro SFF 280 G9 Desktop PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2. Press the green lever to disengage the drive from the drive bay (3), and then slide the optical drive out of the front of the computer (4). NOTE: Computer appearance might vary. 3. If it is necessary to replace the optical drive bezel, insert a straightened paperclip or similar tool into the release hole (1), and then pull the bezel off the drive (2). To install the optical drive, reverse the removal procedure. Front bezel To remove the front bezel, use these procedures. Before removing the front bezel, follow these steps: 1. Prepare the computer for disassembly (see Preparation for disassembly on page 18). 2. Remove the access panel (see Access panel on page 19). 24 Chapter 4 Removal and replacement procedures
2.
Press the green lever to disengage the drive from the drive bay
(3)
, and then slide the optical drive out of
the front of the computer
(4)
.
NOTE:
Computer appearance might vary.
3.
If it is necessary to replace the optical drive bezel, insert a straightened paperclip or similar tool into the
release hole
(1)
, and then pull the bezel off the drive
(2)
.
To install the optical drive, reverse the removal procedure.
Front bezel
To remove the front bezel, use these procedures.
Before removing the front bezel, follow these steps:
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
18
).
2.
Remove the access panel (see
Access panel
on page
19
).
24
Chapter 4
Removal and replacement procedures