HP Pro SFF 280 G9 Desktop PC Maintenance and Service Guide - Page 47

front of the chassis, Remove the cable from the clips

Get HP Pro SFF 280 G9 Desktop PC PDF manuals and user guides View all HP Pro SFF 280 G9 Desktop PC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

1. Prepare the computer for disassembly (see Preparation for disassembly on page 18). 2. Remove the access panel (see Access panel on page 19). 3. Remove the optical drive (see Optical drive on page 23). 4. Remove the front bezel (see Front bezel on page 24). 5. Remove the drive cage (see Hard drive on page 25). 6. Disconnect the antenna cables from the WLAN module (see WLAN module on page 27). Remove the wireless antennas: 1. Remove the Torx screw (1) that secures the antenna to the front of the chassis, and then remove the antenna from the chassis (2). 2. Remove the cable from the clips, and then pull the cable out through the hole on the right side of the front of the chassis (3). NOTE: Computer appearance might vary. The computer might be equipped with either one or two antennas, depending on configuration. To install the wireless antennas and cables, reverse the removal procedures. 40 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
1.
Prepare the computer for disassembly (see
Preparation for disassembly
on page
18
).
2.
Remove the access panel (see
Access panel
on page
19
).
3.
Remove the optical drive (see
Optical drive
on page
23
).
4.
Remove the front bezel (see
Front bezel
on page
24
).
5.
Remove the drive cage (see
Hard drive
on page
25
).
6.
Disconnect the antenna cables from the WLAN module (see
WLAN module
on page
27
).
Remove the wireless antennas:
1.
Remove the Torx screw
(1)
that secures the antenna to the front of the chassis, and then remove the
antenna from the chassis
(2)
.
2.
Remove the cable from the clips, and then pull the cable out through the hole on the right side of the
front of the chassis
(3)
.
NOTE:
Computer appearance might vary.
The computer might be equipped with either one or two antennas, depending on configuration.
To install the wireless antennas and cables, reverse the removal procedures.
40
Chapter 4
Removal and replacement procedures