HP Pro SFF 280 G9 Desktop PC Maintenance and Service Guide - Page 35
When installing a WLAN module, be sure to match the number label on the cable to the number
View all HP Pro SFF 280 G9 Desktop PC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3. Pull the module to remove it from the socket (3). 4. If the WLAN antenna is not connected to the terminal on the WLAN module, you must install a protective sleeve on the antenna connector, as shown in the following illustration. To install the WLAN module, reverse the removal procedure. NOTE: WLAN modules are designed with a notch to prevent incorrect insertion. NOTE: When installing a WLAN module, be sure to match the number label on the cable to the number printed next to the connector on the module. 28 Chapter 4 Removal and replacement procedures
3.
Pull the module to remove it from the socket
(3)
.
4.
If the WLAN antenna is not connected to the terminal on the WLAN module, you must install a protective
sleeve on the antenna connector, as shown in the following illustration.
To install the WLAN module, reverse the removal procedure.
NOTE:
WLAN modules are designed with a notch to prevent incorrect insertion.
NOTE:
When installing a WLAN module, be sure to match the number label on the cable to the number
printed next to the connector on the module.
28
Chapter 4
Removal and replacement procedures