HP StorageWorks 2/16V Brocade Fabric OS MIB Reference - Supporting Fabric OS 5 - Page 103

fcFxPortPhysAdminStatus 1.3.6.1.3.42.2.1.2.3.1.3 3 fcFxPortPhysAdminStatus 1.3.6.1.3.42.2.1.2.3.1.3 The desired state of the Fx_Port: • online (1) Place port online • offline (2) Take port offline • testing (3) Initiate test procedures A management station might place the Fx_Port in a desired state by setting this object accordingly. The testing state (3) indicates that no operational frames can be passed. When a fabric element initializes, all Fx_Ports start with fcFxPortPhysAdminStatus in the offline state (2). As the result of either explicit management action or per configuration information accessible by the fabric element, fcFxPortPhysAdminStatus is then changed to either the online (1) or testing (3) states or remains in the offline state (2). fcFxPortPhysOperStatus 1.3.6.1.3.42.2.1.2.3.1.4 The current operational status of the Fx_Port: • online (1) Login might proceed. • offline (2) Login cannot proceed. • testing (3) Port is under test. • link-failure (4) Failure after online/testing. The testing state (3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2). If fcFxPortPhysAdminStatus is changed to online (1), then fcFxPortPhysOperStatus should change to 1 (online) if the Fx_Port is ready to accept fabric login request from the attached Nx_Port; it should proceed and remain in the link-failure state (4) if and only if there is a fault that prevents it from going to the online state (1). fcFxPortPhysLastChange 1.3.6.1.3.42.2.1.2.3.1.5 The value of sysUpTime at the time the Fx_Port entered its current operational status. A value of 0 indicates that the Fx_Port's operational status has not changed since the agent last restarted. fcFxPortPhysRttov 1.3.6.1.3.42.2.1.2.3.1.6 The Receiver_Transmitter_Timeout value of the Fx_Port. This is used by the receiver logic to detect Loss of Synchronization. Fx_Port Fabric Login Table This table contains one entry for each Fx_Port in the fabric element, and the Service Parameters that have been established from the most recent fabric login, whether implicit or explicit. Fabric OS MIB Reference 87 53-1000439-01