HP StorageWorks 2/16V Brocade Fabric OS MIB Reference - Supporting Fabric OS 5 - Page 26

1 Fabric OS Commands for Configuring SNMP Fabric OS Commands for Configuring SNMP Use the following commands to configure MIBs in the Fabric OS. See the Fabric OS Administrator's Guide for procedures for configuring SNMP on the Brocade switches. TABLE 4 Commands for Configuring SNMP Command Description snmpConfig snmpMibCapSet snmpMibCapShow agtcfgDefault Introduced in Fabric OS v4.4.0, this command has all the features of the existing the agtcfg* commands; in addition, it has SNMPv3 configuration parameters. Enhanced in Fabric OS v4.4 to provide a filter facility at the trap level (previously the filter facility was at MIB level for traps). Enhanced in Fabric OS 5.3.0 to support enabling and disabling of MIBs and traps for the FCIP MIB and the ifTable and ifXTable for FC ports (MIB II Intefaces group). Displays the snmpMibCapSet command settings. Resets the traps to the default values. This command is retained for legacy reasons but is replaced functionally by the snmpConfig command. agtcfgSet Used to set the trap values for SNMP. This command is retained for legacy reasons but is replaced functionally by the snmpMibCapSet command. agtcfgShow Used to display the configuration of the SNMP values. This command is retained for legacy reasons but is replaced functionally by the snmpMibCapShow command. Support for Administrative Domains Administrative Domains are supported in Fabric OS Version 5.3.0 and later releases. An Administrative Domain (AD) is a domain within a fabric. Administrative domains can be used to limit administrator access within a fabric, and to provide service providers with a means to assign portions of a fabric to individual consumers. An AD may contain switches, devices, and ports. An AD may also limit access to a configured set of users. Support for Role Based Access Control Role Based Access Control (RBAC) is supported in Fabric OS Version 5.3.0 and later releas RBAC applies a fixed set of roles that address the access control needs of a majority of customers. Each role is a set of permissions that can be applied to a user that controls the kinds of jobs and tasks the user can perform on a fabric or fabric element. Support for IP V6 Addressing IP V6 addressing is supported in Fabric OS Version 5.3.0 and later releases. 10 Fabric OS MIB Reference 53-1000439-01