HP StorageWorks 2/16V Brocade Fabric OS MIB Reference - Supporting Fabric OS 5 - Page 23

Loading Brocade MIBs 1 Loading Brocade MIBs The Brocade MIB is a set of variables that are private extensions to the Internet standard MIB-II. The Brocade agents support many other Internet-standard MIBs. These standard MIBs are defined in RFC publications. To find specific MIB information, examine the Brocade proprietary MIB structure and the standard RFC MIBs supported by Brocade. BROCADE MIB FILES The Brocade MIB files are as follows: • BRCD_v5_0.mib • SW_v5_5.mib • FA_v3_0.mib • FE_RFC2837.mib • ENTITY_RFC2737.mib • HA_v5_1.mib • FICON_v5_0.mib • CPQ_HOST.mib • CPQ_RACK.mib • FCIP.mib BEFORE LOADING MIBS Before loading Brocade MIB files, ensure that you have the correct version of SNMP for your Fabric OS version (see Table 2). TABLE 2 Firmware Fabric OS Supported SNMP Versions SNMPv1 Fabric OS v2.6.2 and previous Yes Fabric OS v3.2.0 and previous Yes Fabric OS v4.2.0 and previous Yes Fabric OS v4.4.0 Yes Fabric OS v5.x Yes SNMPv2 No1 No1 No1 No1 Yes3 SNMPv3 No No No Yes2 Yes2 1. The corresponding Fabric OS has SNMPv2 capabilities, but it is not officially supported by Brocade. 2. Fabric OS v4.4.0 and v5.x support SNMPv3-USM MIB (snmpUsmMIB), which is available as RFC 3414. 3. SNMPv2 is supported from FOS v5.0.4 and higher, but SNMP v2 traps are not supported. MIB LOADING ORDER Many MIBs use definitions that are defined in other MIBs. These definitions are listed in the IMPORTS section near the top of the MIB. When loading the Brocade MIBs, see Figure 5 to ensure any MIB dependencies are loading in the correct order. Fabric OS MIB Reference 7 53-1000439-01