HP StorageWorks 2/16V Brocade Fabric OS MIB Reference - Supporting Fabric OS 5 - Page 168

5 swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 swFCPortOpStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 The operational status of the port. Values Possible values are: • unknown (0) The port module is physically absent. • online (1) User frames can be passed. • offline (2) No user frames can be passed. • testing (3) No user frames can be passed. • faulty (4) The port module is physically faulty. swFCPortAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 Values The desired state of the port. A management station might place the port in a desired state by setting this object accordingly. Possible values are: • online (1) User frames can be passed. • offline (2) No user frames can be passed. • testing (3) No user frames can be passed. • faulty (4) No user frames can be passed. For Fabric OS v3.x: The 3 (testing) state indicates that no user frames can be passed. As the result of either explicit management action or per configuration information accessible by the switch, swFCPortAdmStatus is then changed to either the 1 (online) or 3 (testing) states or remains in the 2 (offline) state. For Fabric OS v4.x: The 3 (testing) state is not supported. swFCPortLinkState 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 Values Indicates the link state of the port. When the port's link state changes, its operational status (swFCPortOpStatus) is affected. Possible values are: • enabled (1) The port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is in an FC-AL loop). • disabled (2) The port is not allowed to participate in the FC-PH protocol with its attached ports. • loopback (3) The port might transmit frames through an internal path to verify the health of the transmitter and receiver path. 152 Fabric OS MIB Reference 53-1000439-01