HP StorageWorks 2/16V Brocade Fabric OS MIB Reference - Supporting Fabric OS 5 - Page 121

entPhysicalName 1.3.6.1.2.1.47.1.1.1.1.7 4 entPhysicalName 1.3.6.1.2.1.47.1.1.1.1.7 The textual name of the physical entity (physical name of the entity such as chassis, blade, port, and so on). The value of this object should be the name of the component as assigned by the local device and should be suitable for use in commands entered at the device's "console." This might be a text name, such as "console," or a simple component number (for example, port or module number) such as 1, depending on the physical component naming syntax of the device. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string. Note that the value of entPhysicalName for two physical entities is the same in the event that the console interface does not distinguish between them (for example, slot-1 and the card in slot-1). The name provides the type of the entry and its number (for example, slot 1, power supply, and so on). The description gives the textual description of the type of the entry (for example, power supply, module, and so on) entPhysicalHardwareRev 1.3.6.1.2.1.47.1.1.1.1.8 The vendor-specific hardware revision string for the physical entity. The preferred value is the hardware revision identifier actually printed on the component itself (if present). Note that if revision information is stored internally in a nonprintable (for example, binary) format, then the agent must convert such information to a printable format, in an implementation-specific manner. If no specific hardware revision string is associated with the physical component, or if this information is unknown to the agent, then this object will contain a zero-length string. Set to an empty string. Fabric OS MIB Reference 105 53-1000439-01