HP StorageWorks 2/16V Brocade Fabric OS MIB Reference - Supporting Fabric OS 5 - Page 241

connUnitPortName 1.3.6.1.3.94.1.10.1.17 8 connUnitPortName 1.3.6.1.3.94.1.10.1.17 A string describing the addressed port. This object is read-only for Brocade switches. connUnitPortPhysicalNumber 1.3.6.1.3.94.1.10.1.18 This is the internal port number by which this port is known. In many implementations, this should be the same as connUnitPortIndex. Some implementations might have an internal port representation not compatible with the rules for table indices. In these cases, provide the internal representation of this port in this object. This value might also be used in the connUnitLinkPortNumberX or connUnitLinkPortNumberY objects of the connUnitLinkTable. The internal port numbers for Brocade switch. The Brocade switches support 0 through maximum number of ports. The maximum number of supported ports are as follows: Brocade 3200, 3250 8 ports Brocade 4012 12 ports Brocade 200E, 3800, 3850 16 ports Brocade 3900, 4100 32 ports Brocade 4900 64 ports Brocade 5000 32 ports Brocade 7500 16 ports Brocade 7600 16 ports Brocade 12000 128 ports Brocade 24000 128 ports Brocade 48000 256 ports connUnitPortStatObject 1.3.6.1.3.94.1.10.1.19 This OID is depricated. This contains the OID of the first object of the table that contains the statistics for this particular port. If this has a value of 0, then there are no statistics available for this port. The port type information helps identify the statistics objects found in the table. From this point, use the getnext command to get the next statistics object. When the first part of the OID changes, the end of table is reached. Mapped to connUnitPortStatFabricUnitId. connUnitPortProtocolCap 1.3.6.1.3.94.1.10.1.20 Not supported in Fabric OS v2.6.1. This is the bit mask that specifies the driver-level protocol capability of this port. Fabric OS MIB Reference 225 53-1000439-01