HP StorageWorks 2/16V Brocade Fabric OS MIB Reference - Supporting Fabric OS 5 - Page 238
connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9, The FC ID is formatted DD AA PP e.g.
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 238 highlights
8 connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9 connUnitPortModuleType 1.3.6.1.3.94.1.10.1.9 The module type of the port connector. Values Possible values are: • unknown (1) • other (2) • gbic (3) • embedded (4) Fixed (oneXnine) • glm (5) • gbicSerialId (6) • gbicNoSerialId (7) • gbicNotInstalled (8) • smallFormFactor (9) For an external FC_Port with GBIC, this value is set to 6 (gbicSerialId) or 7 (gbicNoSerialId). For an external FC_Port without GBIC, this value is set to 8 (gbicNotInstalled). connUnitPortWwn 1.3.6.1.3.94.1.10.1.10 The World Wide Name of the port, if applicable; otherwise, an empty string. This is in IEEE Extended format, and the extension contains the internal port number of each port. NOTE The internal port number is 1 less than the port index. For example, if the switch has WWN 10:00:00:60:69:10:02:18, then port numbers 0 and 6 have WWN 20:00:00:60:69:10:02:18 and 20:06:00:60:69:10:02:18, respectively. However, the embedded port has WWN 10:00:00:60:69:10:02:18, the same as the switch. connUnitPortFCId 1.3.6.1.3.94.1.10.1.11 This is the assigned Fibre Channel ID of this port. This value is expected to be a Big Endian value of 24 bits. If this is a loop, then it is the AL_PA that is connected. If this is an E_Port, then it contains only the domain ID, left justified, 0 filled. If this port does not have a Fibre Channel address, return all bits set to 1. For an F_Port, this is the Fibre Channel ID to which the connected N_port is assigned. For an FL_Port, this is the Fibre Channel ID of the FL_Port (alpa = 0). For a U or E_Port, this is similar to F_Port. The FC ID is formatted "DD AA PP" (e.g., "02 00 02"). The Brocade Access Gateway port FC ID differs from a Fibre Channel switch. A Fibre Channel switch port FC ID has the same DD with a different AA value for each link. The Brocade Access Gateway "PP" is the port number for F_Ports and is always zero for N_Ports. Therefore the N_Port FC ID always appears as "DD AA 00" (e.g., "02 00 00"). On a Brocade Access Gateway the FC ID of different ports can have the same "AA" value but different "DD" values and vice versa. 222 Fabric OS MIB Reference 53-1000439-01