HP StorageWorks 2/16V Brocade Fabric Watch Administrator's Guide (53-1000243-0 - Page 26
SFP Class Areas, Table 1-8, Indicates
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
1 Fabric Watch Components Table 1-8 Security Class Areas (Continued) Area Indicates SCC Violation Serial Violation SES Violation SLAP Bad Packets SLAP Failures Telnet Violation TS Out of Sync WSNMP Violation An SCC violation occurs when an unauthorized switch tries to join a secure fabric. The WWN of the unauthorized switch appears in the ERRLOG. A serial violation occurs when a secure switch detects an unauthorized serial port connection request. An SES violation occurs when an SES (SCSI Enclosed Services) request reaches a secure switch from an unauthorized WWN. A SLAP (Switch Link Authentication Protocol) bad packets failure occurs when the switch receives a bad SLAP packet. Bad SLAP packets include unexpected packets and packets with incorrect transmission IDs. A SLAP failure occurs when packets try to pass from a nonsecure switch to a secure fabric. A telnet violation occurs when a telnet connection request reaches a secure switch from an unauthorized IP address. A TS (Time Server) out-of-synchronization error has been detected. A WSNMP violation occurs when an SNMP set operation reaches a secure switch from an unauthorized IP address. SFP Class Areas Table 1-9 lists Fabric Watch areas in the SFP class and describes each area. Note SFPs connected to GbE ports are not monitored. 1-10 Fabric Watch Administrator's Guide Publication Number: 53-1000243-01