HP StorageWorks 2/16V Brocade Fabric Watch Administrator's Guide (53-1000243-0 - Page 71

Configuring FRUs, fwFruCfg Configuration

Get HP StorageWorks 2/16V - SAN Switch PDF manuals and user guides View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 71 highlights

Configuring FRUs 3 The fwFruCfg command displays your current FRU configuration, as shown in Figure 3-13. The types of FRUs are different for the various platforms. In the prompt that follows your current FRU configuration, you are asked to provide values for each FRU alarm state and alarm action. To accept the default value for each FRU (as shown in Figure 3-13), press Return. After you have configured a FRU alarm state and alarm action, the values apply to all FRUs of that type. For example, the values specified for a slot FRU will apply to all slots in the enclosure. swd123:admin> fwfrucfg The current FRU configuration: Alarm State Alarm Action Slot 31 1 Power Supply 0 0 Fan 0 0 WWN 0 0 Note that the value 0 for a parameter means that it is NOT used in the calculation Configurable Alarm States are: Absent-1, Inserted-2, On-4, Off-8, Faulty-16 Configurable Alarm Actions are: Errlog-1, E-mail-16 Slot Alarm State: (0..31) [31] Slot Alarm Action: (0..17) [1] Power Supply Alarm State: (0..31) [0] Power Supply Alarm Action: (0..17) [0] Fan Alarm State: (0..31) [0] Fan Alarm Action: (0..17) [0] WWN Alarm State: (0..31) [0] WWN Alarm Action: (0..17) [0] Fru configuration left unchanged Figure 3-13 fwFruCfg Configuration You can specify triggers for any number of alarm states or alarm actions. The first prompt enables you to select which FRU states trigger events. To select a group of FRU states: 1. Add the numbers beside each state (for the states you want to include). 2. Enter the total at the prompt. For example, to trigger events using the Absent, Off, and Faulty states, add the assigned values and enter that value at the prompt. In this case, the values are 1, 8, and 16, respectively, and the total is 25. Fabric Watch Administrator's Guide Publication Number: 53-1000243-01 3-23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
Fabric Watch Administrator’s Guide
3-23
Publication Number: 53-1000243-01
Configuring FRUs
3
The
fwFruCfg
command displays your current FRU configuration, as shown in
Figure 3-13
. The types
of FRUs are different for the various platforms. In the prompt that follows your current FRU
configuration, you are asked to provide values for each FRU alarm state and alarm action. To accept the
default value for each FRU (as shown in
Figure 3-13
), press Return. After you have configured a FRU
alarm state and alarm action, the values apply to all FRUs of that type. For example, the values specified
for a slot FRU will apply to all slots in the enclosure.
Figure 3-13
fwFruCfg Configuration
You can specify triggers for any number of alarm states or alarm actions. The first prompt enables you to
select which FRU states trigger events.
To select a group of FRU states:
1.
Add the numbers beside each state (for the states you want to include).
2.
Enter the total at the prompt.
For example, to trigger events using the Absent, Off, and Faulty states, add the assigned values and enter
that value at the prompt. In this case, the values are 1, 8, and 16, respectively, and the total is 25.
swd123:admin>
fwfrucfg
The current FRU configuration:
Alarm State
Alarm Action
------------------------------------------------------
Slot
31
1
Power Supply
0
0
Fan
0
0
WWN
0
0
Note that the value 0 for a parameter means that it is NOT used
in the calculation
Configurable Alarm States are:
Absent-1, Inserted-2, On-4, Off-8, Faulty-16
Configurable Alarm Actions are:
Errlog-1, E-mail-16
Slot Alarm State: (0..31) [31]
Slot Alarm Action: (0..17) [1]
Power Supply Alarm State: (0..31) [0]
Power Supply Alarm Action: (0..17) [0]
Fan Alarm State: (0..31) [0]
Fan Alarm Action: (0..17) [0]
WWN Alarm State: (0..31) [0]
WWN Alarm Action: (0..17) [0]
Fru configuration left unchanged