HP StorageWorks 2/16V Brocade Fabric Watch Administrator's Guide (53-1000243-0 - Page 73
Configuring Fabric Watch Using SNMP, Enabling Fabric Watch Traps in SNMP, snmpMibCapSet, agtCfgSet
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Configuring Fabric Watch Using SNMP 3 3. Start a telnet session with the switch, and enter the snmpMibCapSet command at the prompt; this enables you to send Fabric Watch traps to an SNMP management station (see Figure 3-15). Then enter the agtCfgSet command to configure the SNMP management host IP address (see Figure 316). swd77:admin> snmpmibcapset The SNMP Mib/Trap Capability has been set to support FE-MIB SW-MIB FA-MIB SW-TRAP FA-TRAP FA-MIB (yes, y, no, n): [yes] FICON-MIB (yes, y, no, n): [no] HA-MIB (yes, y, no, n): [no] SW-TRAP (yes, y, no, n): [yes] yes swFCPortScn (yes, y, no, n): [no] swEventTrap (yes, y, no, n): [no] swFabricWatchTrap (yes, y, no, n): [no] yes swTrackChangesTrap (yes, y, no, n): [no] FA-TRAP (yes, y, no, n): [yes] connUnitStatusChange (yes, y, no, n): [no] connUnitEventTrap (yes, y, no, n): [no] connUnitSensorStatusChange (yes, y, no, n): [no] connUnitPortStatusChange (yes, y, no, n): [no] SW-EXTTRAP (yes, y, no, n): [no] swd77:admin> Figure 3-15 Enabling Fabric Watch Traps in SNMP Fabric Watch Administrator's Guide Publication Number: 53-1000243-01 3-25