HP StorageWorks 2/16V HP StorageWorks SAN Switch 2/8V, 2/16V and 2/16N Instal - Page 43
Assembling the inner rails, Phillips pan-head SEMS screws as shown
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installing the SAN Switch a. Assemble the two inner rails (one on each side) to the switch using the appropriate number (from step 5 on page 42) of #8-32 x 5/16-inch Phillips pan-head SEMS screws as shown in Figure 10. Note: The rail kit provides fourteen #8-32 x 5/16-inch screws for assembling the inner rails. Each switch requires a different number of these screws. For example, Figure 10 shows the an inner rail being attached to the SAN Switch 2/16V with five screws. Attaching both inner rails requires ten screws. 0012a Figure 10: Assembling the inner rails Note: For factory integration only, tighten the #8-32 x 5/16-inch Phillips pan-head SEMS screws and torque between 6 to 8 inch-pounds. SAN Switch 2/8V, 2/16V and 2/16N Installation Guide 43