HP StorageWorks 2/16V HP StorageWorks SAN Switch 2/8V, 2/16V and 2/16N Instal - Page 62
LED Patterns, System and Power LED Patterns, Table 10: System LED Patterns During Normal Operation
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Managing the SAN Switches LED Patterns Table 10 and Table 11 summarize LED location, color, and meaning of the 2/8V and 2/16V LEDs, as well as any recommended user response. System and Power LED Patterns The system and power LED patterns are shown in Table 10. Table 10: System LED Patterns During Normal Operation LED Name, Location System Status and Power Status At right of serial port on bottom LED Color No light Steady green Slow-flashing green (on 1 second, off 1 second) Status of Hardware Switch is off, boot is not complete, or boot failed. Switch is on and power supplies are functioning properly. One or both of the following are true: One or more environmental ranges are exceeded. Error log contains one or more port diagnostic error messages. Recommended Action Verify that switch is on and has completed booting. No action required. Check environmental conditions, error log, Port Status LEDs, transceivers, cables, and loopback plugs. Correct error condition. Clear error log. Amber One failed power supply in the SAN Switch 2/16V Rerun diagnostics to verify fix. No action required, but failure of the remaining power supply will cause the switch to fail. 62 SAN Switch 2/8V, 2/16V and 2/16N Installation Guide