HP StorageWorks 2/16V HP StorageWorks SAN Switch 2/8V, 2/16V and 2/16N Instal - Page 52
Create an Ethernet Connection and Log In, Connecting the Ethernet cable
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Installing the SAN Switch 5. If the serial port is no longer required, log out of the serial console, remove the serial cable, and replace the safety plug in the serial port. Note: Any time the port is not in use, the safety plug should be installed to protect it from foreign material. Create an Ethernet Connection and Log In Use these steps to create an Ethernet connection. 1. Connect an Ethernet cable to the Ethernet port and to the workstation or to an Ethernet network containing the workstation (Figure 16). 100-240 VAC 1.0A 47-63Hz IOIOI ! 100-240 VAC 1.0A 47-63Hz 0016a Figure 16: Connecting the Ethernet cable After this connection is made, the switch can be accessed remotely, by command line or by Advanced Web Tools. Ensure that the switch is not being modified from any other connections during the remaining steps. 2. Log in to the switch by telnet, using the admin account. 52 SAN Switch 2/8V, 2/16V and 2/16N Installation Guide