HP StorageWorks 2/16V HP StorageWorks SAN Switch 2/8V, 2/16V and 2/16N Instal - Page 55
Verifying Configuration, Backing Up Your Configuration
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Installing the SAN Switch The cables used in trunking groups must meet specific requirements. For a list of these requirements, refer to the HP StorageWorks Fabric OS Features 4.2.x User Guide. Verifying Configuration After completing the configuration, use the LEDs and commands to verify that the configuration has been accepted: 1. Check the LEDs to verify that all components are functional. For information about LED patterns, refer to "Interpreting LED Activity" on page 59. 2. Verify the correct operation of the SAN Switch 2/8V and SAN Switch 2/16V by entering the switchshow command from the workstation. This command provides information about the switch and port status. 3. Verify the correct operation of the SAN Switch 2/8V and SAN Switch 2/16V in the fabric by entering the fabricshow command from the workstation. This command provides general information about the fabric. Backing Up Your Configuration HP recommends regular backups to ensure that a recent configuration is available for downloading to a replacement switch, if required. For specific instructions about how to back up the configuration, refer to the HP StorageWorks Fabric OS Procedures 4.2x User Guide. Back up the switch configuration to an FTP server by entering the configupload command and following the prompts. This command uploads the switch configuration to the server, making it available for downloading to a replacement switch, if necessary. SAN Switch 2/8V, 2/16V and 2/16N Installation Guide 55