HP StorageWorks 2/16V HP StorageWorks SAN Switch 2/8V, 2/16V and 2/16N Instal - Page 49
Create a Serial Connection, Connecting the serial cable, RS-232
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Installing the SAN Switch Create a Serial Connection Before you can begin configuring the switch, you must create a connection via the serial port. To create a serial connection: 1. Insert the provided serial cable into the serial port on the switch. 2. Connect the serial cable to an RS-232 serial port on the workstation (Figure 14). 100-240 VAC 1.0A 47-63Hz IOIOI ! Figure 14: Connecting the serial cable 100-240 VAC 1.0A 47-63Hz 0014a If the serial port on the workstation uses an RJ-45 connector instead of an RS-232, remove the adapter on the end of the serial cable and insert the exposed RJ-45 connector into the RJ-45 serial port on the workstation. 3. Disable any serial communication programs running on the workstation. SAN Switch 2/8V, 2/16V and 2/16N Installation Guide 49