HP StoreOnce 4430 HP D2D Backup System Installation and Configuration guide (E - Page 48

Fibre Channel card LEDs, Capacity upgrade kit LEDs, Table 2 FC card LEDs

Get HP StoreOnce 4430 PDF manuals and user guides View all HP StoreOnce 4430 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

2. Disk beacon LED Off: The disk is not a part of RAID Steady blue: identifies a specific disk within the unit Beacon mode The HP StoreOnce Backup System supports a Beacon LED sequence, which helps a user identify which unit is being configured, if several are connected to the network. There is also a Beacon LED on the individual disks so that you can identify a specific disk within the HP D2D. Use the Network page of the Web Management Interface to turn Beacon Mode on and off for the HP StoreOnce Backup System. This turns the Beacon LED on the front and the rear of the HP D2D solid blue. If you do not switch off Beacon Mode, it will continue for 5 minutes. You can also switch Beacon mode on and off by pressing the LED on the front panel. Fibre Channel card LEDs If you have a Fibre Channel version of the HP StoreOnce Backup System, there are three LEDs adjacent to each FC port. Table 2 FC card LEDs Yellow LED Off On Flashing Alternately flashing Off Off Off Off On Flashing Green LED Off On Flashing Alternately flashing Off Off On Flashing Off Off Amber LED Off On Flashing Alternately flashing On Flashing Off Off Off Off Activity Power Off (OK) Power on before or after software initialization. Awaiting HBA software initialization. Power on after software initialization. Link not initialized. software fault (OK) Connected at: 2 (HP D2D4300 Series only) or 1 (all other FC systems) Gb/s Activity at 2 (HP D2D4300 Series only) or 1 (all other FC systems) Gb/s (OK) Connected at 4 (HP D2D4300 Series only) or 2 (all other FC systems) Gb/s Activity at 4 (HP D2D4300 Series only) or 2 (all other FC systems) Gb/s (OK) Connected at 8 (HP D2D4300 Series only) or 4 (all other FC systems) Gb/s Activity at 8 (HP D2D4300 Series only) or 4 (all other FC systems) Gb/s Capacity upgrade kit LEDs There are three LEDs on the front of the Capacity Upgrade Kit. 48 Understanding LEDs

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
Off: The disk is not a part of RAID
Steady blue: identifies a specific disk within the unit
2. Disk beacon LED
Beacon mode
The HP StoreOnce Backup System supports a Beacon LED sequence, which helps a user identify
which unit is being configured, if several are connected to the network. There is also a Beacon
LED on the individual disks so that you can identify a specific disk within the HP D2D.
Use the Network page of the Web Management Interface to turn Beacon Mode on and off for the
HP StoreOnce Backup System. This turns the Beacon LED on the front and the rear of the HP D2D
solid blue. If you do not switch off Beacon Mode, it will continue for 5 minutes. You can also switch
Beacon mode on and off by pressing the LED on the front panel.
Fibre Channel card LEDs
If you have a Fibre Channel version of the HP StoreOnce Backup System, there are three LEDs
adjacent to each FC port.
Table 2 FC card LEDs
Activity
Amber LED
Green LED
Yellow LED
Power Off (OK)
Off
Off
Off
Power on before or after software initialization.
Awaiting HBA software initialization.
On
On
On
Power on after software initialization. Link not
initialized.
Flashing
Flashing
Flashing
software fault (OK)
Alternately flashing
Alternately flashing
Alternately flashing
Connected at: 2 (HP D2D4300 Series only) or
1 (all other FC systems) Gb/s
On
Off
Off
Activity at 2 (HP D2D4300 Series only) or 1
(all other FC systems) Gb/s (OK)
Flashing
Off
Off
Connected at 4 (HP D2D4300 Series only) or
2 (all other FC systems) Gb/s
Off
On
Off
Activity at 4 (HP D2D4300 Series only) or 2
(all other FC systems) Gb/s (OK)
Off
Flashing
Off
Connected at 8 (HP D2D4300 Series only) or
4 (all other FC systems) Gb/s
Off
Off
On
Activity at 8 (HP D2D4300 Series only) or 4
(all other FC systems) Gb/s
Off
Off
Flashing
Capacity upgrade kit LEDs
There are three LEDs on the front of the Capacity Upgrade Kit.
48
Understanding LEDs