HP StoreOnce 4430 HP StoreOnce 2600, 4200 and 4400 Backup system Maintenance a - Page 6
Using the ProLiant Guide with HP StoreOnce 4430 models
View all HP StoreOnce 4430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Using the ProLiant Guide with HP StoreOnce 4430 models When using the HP ProLiant DL370 G6 guide, be aware of the following HP StoreOnce-specific information: • The CPU is Intel Xeon X5690 (Kit part number 625071-B21 includes Heatsink) - there are two per system. • The HP StoreOnce Backup system has 12 removable 2TB MDL SAS hard disks (part number 507616-B21). • The system comes with four RAID controller cards - the HP Smart Array P410i (integrated into the Motherboard and with FBWC) and three HP Smart Array P812 cards (each with 1024MB cache module and FBWC). The P812 cards are installed in PCI-e Slots 4, 5 and 6. Part numbers for the P812 card are as follows: ◦ HP Smart Array P812/1024 MB with FBWC Controller: 487204-B21 ◦ FBWC: 534562-B21 (this comprises the 1024 cache, capacitor and cable assembly) For more information about the HP Smart Array cards, search on http://www.hp.com/support/ manuals. • The configuration of the system memory is 96 GB (12 x 8 GB DIMMs, 6 per processor). The part number for each 8 GB DIMM is 500662-B21. • The system has an HP StorageWorks 8Gb Dual Channel PCI-e to Fibre Channel Host Bus Adapter, part number AJ764A. • The system has an HP NC552SFP Dual Port 10GbE Server Adapter, part number 614203-B21. • The system has an HP SAS Expander Card, part number 468406-B21, in PCI-e Slot 1. Figure 1 Rear view of the HP StoreOnce 4430 Backup system 1. Power supplies (two) 2. iLO2 Management port (do not use for data) 3. LAN ports 1 (recommended connection) and 2 4. 10-Gb Ethernet card with two ports 5. Fibre Channel card 6 and 7. RAID cards 8. HP SAS expander card 6 Introduction