HP StoreOnce 4430 HP StoreOnce 2600, 4200 and 4400 Backup system Maintenance a - Page 8
Using the ProLiant Guide with HP StoreOnce 4220/4210 models, For Fibre Channel models
View all HP StoreOnce 4430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Using the ProLiant Guide with HP StoreOnce 4220/4210 models When using the HP ProLiant DL180se G6 guide, be aware of the following HP StoreOnce-specific information: • The CPU is Intel Xeon X5660 (Spare P/N 590617-B21) - there are two per system • The HP StoreOnce Backup system has 12 removable hard disks. (The HP StoreOnce 4210 Backup system has 12 x 1 TB hard disks; but only 500 GB on each disk is available to the system as storage.) • The configuration of the system memory for the 4220 product is 72 GB (9 x 8 GB DIMMs; 5 for the first processor, 4 for the second). The configuration of the system memory for the 4210 product is 64 GB (8 x 8 GB DIMMs; 4 for each processor).The part number for each 8 GB DIMM is 500662-B21. • The HP StoreOnce Backup system is supplied with an HP Smart Array P212 Controller (with 512 MB FBWC module) pre-installed in one of the full-height PCI-e slots. For more information about this card, search on http://www.hp.com/support/manuals. Part numbers are as follows: ◦ HP Smart Array P212/Zero Memory Controller: 462828-B21 ◦ HP 512 MB Flash Backed Write Cache (FBWC): 534916-B21 • For Fibre Channel models, the system has an HP Dual Channel 8Gb PCIe to Fibre Channel Host Bus Adapter, part number AJ764A, which is installed in a full-height slot Figure 3 Rear view of the HP StoreOnce 4210/4220 Backup system 1. Power supply cable sockets (two) 2. LAN port 1 (recommended connection) 3. LAN port 2 4. Management LAN port (Do not use for data) 5. PCI-e slots 6. VGA port for system console monitor 7. USB ports for system console keyboard and mouse 8. RAID controller 9. Fibre Channel card (HP StoreOnce 4210fc/4220) 8 Introduction