HP StoreOnce 4430 HP StoreOnce 2600, 4200 and 4400 Backup system Maintenance a - Page 7
Using the ProLiant Guide with HP StoreOnce 4420 models
View all HP StoreOnce 4430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Using the ProLiant Guide with HP StoreOnce 4420 models When using the HP ProLiant DL370 G6 guide, be aware of the following HP StoreOnce-specific information: • The CPU is Intel Xeon X5690 (Kit part number 625071-B21 includes Heatsink) - there are two per system. • The HP StoreOnce Backup system has 12 removable 1TB MDL SATA hard disks (part number 454146-B21). • The system comes with three RAID controller cards - the HP Smart Array P410i (integrated into the Motherboard and with FBWC) and two HP Smart Array P411 cards (each with a 512MB FBWC module). The P411 cards are installed in PCI-e Slots 5 and 6. Part numbers for the P411 card are as follows: ◦ HP Smart Array P411/512 MB with FBWC Controller: 578229-B21 ◦ HP 512 MB Flash Backed Write Cache (FBWC): 534916-B21 For more information about the HP Smart Array cards, search on http://www.hp.com/support/ manuals. • The configuration of the system memory is 96 GB (12 x 8 GB DIMMs, 6 per processor). The part number for each 8 GB DIMM is 500662-B21. • The system has an HP 8Gb Dual Channel PCI-e to Fibre Channel Host Bus Adapter, part number AJ764A. • The system has an HP NC522SFP Dual Port 10GbE Server Adapter, part number 614203-B21. • The system has an HP SAS Expander Card, part number 468406-B21, in PCI-e Slot 1. Figure 2 Rear view of the HP StoreOnce 4420 Backup system 1. Power supplies (two) 2. iLO2 Management port (do not use for data) 3. LAN ports 1 (recommended connection) and 2 4. 10-Gb Ethernet card with two ports 5. Fibre Channel card 6. RAID cards 7. HP SAS expander card HP StoreOnce and HP ProLiant 7