HP Tc4200 HP Compaq tc4200 Tablet PC - Maintenance and Service Guide - Page 124
card away from the socket at a 45-degree angle, Remove the Mini PCI communications card by pulling
View all HP Tc4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Removal and Replacement Procedures ✎ Make note of which antenna cable is attached to which antenna clip on the Mini PCI communications card before disconnecting the cables. 4. Disconnect the auxiliary and main antenna cables 1 from the Mini PCI communications card. 5. Spread the two retaining tabs 2 on each side of the Mini PCI socket to release the Mini PCI communications card. (The edge of the card opposite the socket rises away from the tablet PC.) 6. Remove the Mini PCI communications card by pulling the card away from the socket at a 45-degree angle 3. ✎ The Mini PCI communications card is slotted 4 to prevent incorrect installation. Removing a Mini PCI Communications Card Reverse the above procedure to install a Mini PCI communications card. Maintenance and Service Guide 6-33