HP TouchSmart tx2-1109au HP TouchSmart tx2 Notebook PC - Maintenance and Servi - Page 48

Hard drive, Loosen the two Phillips PM2.0×5.0 captive screws

Get HP TouchSmart tx2-1109au PDF manuals and user guides View all HP TouchSmart tx2-1109au manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Hard drive NOTE: The hard drive spare part kit includes a hard drive bracket, hard drive connector, and Mylar cover. Description 500-GB, 7200-rpm 320-GB, 7200-rpm 320-GB, 5400-rpm 160-GB, 7200-rpm Hard Drive Hardware Kit (includes hard drive bracket, hard drive connector, and hard drive screws) Spare part number 634934-001 or 574875-001 603783-001 622643-001 579045-001 497744-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 38). Remove the hard drive: 1. Position the computer with the front toward you. 2. Loosen the two Phillips PM2.0×5.0 captive screws (1) that secure the hard drive cover to the computer. 3. Lift the left side of the hard drive cover (2) and swing it to right. 40 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
Hard drive
NOTE:
The hard drive spare part kit includes a hard drive bracket, hard drive connector, and Mylar
cover.
Description
Spare part number
500-GB, 7200-rpm
634934-001 or
574875-001
320-GB, 7200-rpm
603783-001
320-GB, 5400-rpm
622643-001
160-GB, 7200-rpm
579045-001
Hard Drive Hardware Kit (includes hard drive bracket, hard drive connector, and
hard drive screws)
497744-001
Before removing the hard drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
Battery
on page
38
).
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.0×5.0 captive screws
(1)
that secure the hard drive cover to
the computer.
3.
Lift the left side of the hard drive cover
(2)
and swing it to right.
40
Chapter 4
Removal and replacement procedures