HP t5630 Microsoft Windows Embedded Standard 2009 (WES) and Windows XP Embedde - Page 53
HP ThinState Deploy, USB boot
View all HP t5630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
HP ThinState Deploy To perform an HP ThinState deployment: 1. Set the boot order in the F10 System BIOS to USB boot. 2. Attach the USB flash drive to the thin client unit you wish to deploy the captured image to, and then power on the unit. 3. Follow the on-screen instructions. After you remove the USB flash drive and cycle power to the system, the image will unbundle. This process can take between 10-12 minutes. Do not interrupt or cycle power to the unit during this process. You may use the captured image (flash.ibr) found in the USB flash drive in combination with Altiris Deployment or HP Device Manager Solution to remotely image multiple thin client units. NOTE: You must use flash.ibr in conjunction with the HP ThinState Deploy utility (e.g., ibr.exe). Flash.ibr is not compatible with the Altiris rdeploy.exe or rdeployt.exe utilities. Please consult the HP Compaq Thin Client Imaging Tool white paper at http://h20000.www2.hp.com/bc/docs/support/ SupportManual/c00485307/c00485307.pdf. For more information about Altiris, see http://www.altiris.com/. HP ThinState Capture 45