Honeywell WAVE2EX Setup Guide - Page 55
System Displays
UPC - 781410215504
View all Honeywell WAVE2EX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
LYNXR-I Installation and Setup Guide System Operation System Displays Display PC PH AC ALARM AWAY BYPASS CHIME FAULT FIRE LOW BAT INSTANT MESSAGE REC STAY TEST Meaning Remote Phone Control feature is active (Appears in place of the clock). System Speaker Phone mode is active (Appears in place of the clock). AC power is present. If not displayed, the system is operating on backup battery power. System is armed and an intrusion has been detected (also appears during a fire alarm or audible emergency alarm). Accompanied by the protection zone that is in alarm. All burglary zones, interior and perimeter, are armed. One or more burglary protection zones have been bypassed. Chime feature is activate A malfunction is discovered in the system; or an open is detected in a fire zone; or a fault in a day/night burglary zone is discovered during a disarmed period. Accompanied by a display of the zone number in trouble. A fire alarm or fire fault is present. Accompanied by a display of the zone that is in alarm Low battery condition in a wireless sensor (if zone number is displayed) or low system battery (if no zone number is displayed). If 00 is displayed, a wireless keypad has a low battery condition. Entry delay is turned off. A message has been recorded and has not yet been played back. The system is in Recording mode. Perimeter Burglary zones, such as protected windows and doors, are armed System is in Test mode. - 55 -