Husqvarna AUTOMOWER 310 Owner Manual - Page 15
Maintenance, In the event of a thunderstorm, Introduction, maintenance
View all Husqvarna AUTOMOWER 310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2.3.5 In the event of a thunderstorm CAUTION: Do not lift the product when it is parked in the charging station. It can damage the charging station and/or the product. Press the STOP button and pull the product out of the charging station before lifting it. 2.3.4 Maintenance WARNING: When the product is turned upside down the main switch must always be in the 0 position. The main switch should be set in the 0 position before all work on the chassis of the product, such as cleaning or replacing the blades. To reduce the risk of damage to electrical components in the product and the charging station, we recommend that all connections to the charging station are disconnected (power supply, boundary wire and guide wire) if there is a risk of a thunderstorm. 1. Mark the wires to simplify reconnecting. The charging station's connections are marked AR, AL and G1. 2. Disconnect all connected wires and the power supply. 3. Connect all the wires and the power supply if there is no longer a risk of thunder. It is important that each wire is connected to the right place. CAUTION: Never use a high-pressure washer or even running water to clean the product. Never use solvents for cleaning. CAUTION: Use the plug to disconnect the charging station before any cleaning or maintenance of the charging station or the loop wire. Inspect the product each week and replace any damaged or worn parts. Refer to Introduction maintenance on page 38. 1220 - 001 - 08.07.2019 Safety - 15