Husqvarna AUTOMOWER 310 Owner Manual - Page 24
To set the timer, To copy the timer setting, Security level, To set the security level
View all Husqvarna AUTOMOWER 310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
500 m2 / 56 ≈ 9 h. 600 yd2 / 0.01 ≈ 9 h. Days / week 7 h / day 9 Timer settings 07:00 - 16:00 / 07:00 am - 4 pm 3.9.2.2 To set the timer 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Timer > Overview Timer settings > Overview. 3. Use the arrow buttons and the OK button to select the day. 4. Use the left arrow button to select the time period. 5. Push the OK button. 6. Enter the time with the number buttons. The product can cut the grass 1 or 2 periods each day. 3.9.2.4 To reset the timer setting You can remove all timer settings and use the factory setting. The factory timer setting lets the product to operate all hours of each day of the week. Refer to Timer and Standby on page 35. 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Timer > Overview Timer settings > Overview > Reset timer. a) Push the arrow buttons to select Current day to only set the current day to factory settings. b) Push the arrow buttons to select All week to reset all timer settings to factory settings. 3. Push the OK button. 3.9.3 Security level 7. If the product must not cut grass on a specified day, unselect the box adjacent to the 2 time periods. 3.9.2.3 To copy the timer setting 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Timer > Overview Timer settings > Overview > Copy to. 3. Use the arrow buttons and the OK button to copy the timer setting. You can copy the timer settings day to day or for the full week. There are 3 security levels for the product. Function Alarm PIN-code Time lock Low Medium High X X X X X X • Alarm - An alarm goes off if the PIN-code is not entered within 10 seconds after the STOP button is pushed. The alarm also goes off when the product is lifted. The alarm stops when the PIN-code is entered. • PIN-code - The correct PIN-code must be entered to get access to the Menu structure of the product. If the incorrect PIN-code is entered 5 times, the product is locked for a time. The lock is extended for each new incorrect try. • Time lock - The product locks if the PINcode has not been entered in 30 days. Enter the PIN-code to get access to the product. 3.9.3.1 To set the security level Select 1 of 3 security levels for your product. 24 - Installation 1220 - 001 - 08.07.2019