Husqvarna AUTOMOWER 310 Owner Manual - Page 19
To make a secondary area, To set the corridor width of the boundary wire
View all Husqvarna AUTOMOWER 310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
B 0 cm / 0" A CAUTION: Do not put a section of • Put the boundary wire around the secondary boundary wire across the other. area (B) to make an island. Refer to To The sections of boundary wire make an island on page 18. must be parallel. Note: The boundary wire must be put as 1 loop around all of the work area (A + B). CAUTION: Do not put the guide wire across the boundary wire, for example a boundary wire that goes to an island. Note: When the product cuts grass in the secondary area, the Secondary area mode must be selected. Refer to Secondary area on page 34. 3.3.3.4 To make a secondary area Make a secondary area (B) if the work area has 2 areas that are not connected with a passage. The work area with the charging station is the main area (A). Note: The product must be manually moved between the main area and the secondary area. 3.3.3.5 To set the corridor width of the boundary wire The boundary wire corridor is the area adjacent to the boundary wire, which the product uses to find the charging station. When the product moves in the direction of the charging station, it always moves to the left of the boundary wire. 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Installation > Advanced > Corridor width > Boundary. 3. Use the number buttons to select a corridor width of 0 to 9. 4. Push the BACK button. 3.3.4 To examine where to put the guide wire • Put the guide wire in a line at a minimum of 2 m / 7 ft. in front of the charging station. • Make sure that the guide wire has as much free area as possible to the left of the guide wire when facing the charging station. Refer 1220 - 001 - 08.07.2019 Installation - 19