Husqvarna AUTOMOWER 310 Owner Manual - Page 25
To change the PIN-code, To change the length of the alarm, Weather timer, To set the Weather timer
View all Husqvarna AUTOMOWER 310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Settings > Security > Security level. 3. Use the arrow buttons and the OK button to select the level of security. 4. Push the OK button. 3.9.3.2 To change the PIN-code 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Settings > Security > Advanced > Change PIN-code. 3. Enter the new PIN code. 4. Push the OK button. 5. Enter the new PIN code. 6. Push the OK button. 7. Make a note of the new PIN code. Refer to Introduction on page 3. 3.9.3.3 To change the length of the alarm 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Security > Advanced > Duration > Duration of alarm. 3. Use the arrow buttons to select a time interval of 1 to 20 minutes. 4. Push the BACK button. 3.9.3.4 To change the length of the time lock 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Security > Advanced > Duration > Duration of time lock. 3. Use the number buttons to select a time interval of 1-90 days. 4. Push the BACK button. 3.9.4 Weather timer The Weather timer automatically adjust the cutting time to the growth of the grass. The product is not permitted to operate more than the timer settings. The first operation of the day is set by the timer settings. Then the Weather timer selects if the product will continue to operate. Note: The Weather timer is reset if the product stops to operate for more than 50 hours or if a Reset of all user setting is done. The Weather timer is not changed if a Reset of timer settings is done. 3.9.4.1 To set the Weather timer 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Weather timer > Use weather timer. 3. Push the OK button to select the Weather timer. 4. Push the BACK button. 3.9.4.2 To set the Weather timer frequency Set how frequently the product must cut the grass when the Weather timer is in use. 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Weather timer > Cutting time. 3. Use the arrow buttons to select Low, Medium or High frequency. 4. Push the BACK button. 3.9.5 Lawn Coverage The Lawn coverage function is used to guide the product to remote parts of the work area. If the work area includes areas that are connected with narrow passages, the Lawn coverage function is useful to be able to maintain a well-cut lawn in all parts of the yard. You can divide you lawn into 3 areas. The product begins to mow when it reaches the Lawn coverage point. At all other times, the product leaves the charging station in the standard manner and starts to mow. 1220 - 001 - 08.07.2019 Installation - 25