Husqvarna AUTOMOWER 310 Owner Manual - Page 30
Spiral Cutting, To set the level of Spiral Cutting, Slope control, To disable the Slope control
View all Husqvarna AUTOMOWER 310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
3.9.10.3 Spiral Cutting The product cuts the grass in a spiral pattern if the grass is longer in an area. Spiral cutting can be set in 5 levels: • Low• Low • Mid • High • High+ The level sets how sensitive the product is to changes in grass height. Note: Spiral cutting is only started in the Main area mode. Cutting in the Secondary area mode does not let the product to start Spiral cutting. Spiral Cutting does not start in slopes steeper than 15%. To set the level of Spiral Cutting 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Settings > Spiral Cutting > Use Spiral Cutting > Intensity. 3. Use the left arrow button to select the level of the Spiral Cutting. 4. Push the BACK button. 3.9.10.4 Slope control In order to decrease lawn wear near the boundary wire in slopes, the product prevents to move in the opposite direction when the product operates in a slope. Slope control is enabled in the factory settings. To disable the Slope control 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Settings > Slope control > Use Slope control. 3. Push the BACK button. 3.9.10.5 To set the time & date 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Settings > General > Time & Date. 3. Use the number buttons to set the time and then push the BACK button. 4. Use the number buttons to set the date and then push the BACK button. 5. Use the arrow buttons to set the time format and then push the BACK button. 6. Use the arrow buttons to set the date format and then push the BACK button. 3.9.10.6 To set the language 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Settings > General > Language. 3. Use the arrow buttons to select language and then push the BACK button. 3.9.10.7 To set the country 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Settings > General > Country. 3. Use the arrow buttons to select country and then push the BACK button. 3.9.10.8 To reset all user settings 1. Do steps 1-3 in To get access to the menu on page 23. 2. Use the arrow buttons and the OK button to move through the menu structure Settings > General > Reset all user settings. 3. Use the right arrow button to select Proceed with reset of all user settings? 4. Push the OK button to reset all the user settings. Note: Security level, PIN code, Loop signal, Messages, Date & Time, Language and Country settings are not reset. 3.9.10.9 The About menu The About menu displays information about the product, for example serial number and firmware versions. 30 - Installation 1220 - 001 - 08.07.2019