Husqvarna AUTOMOWER 310 Owner Manual - Page 37
Adjust the cutting height
View all Husqvarna AUTOMOWER 310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
4.9 Adjust the cutting height The cutting height can be varied from MIN (2 cm / 0.8 in.) to MAX (6 cm / 2.4 in.). CAUTION: During the first weeks after a new installation, the cutting height must be set to MAX to avoid damaging the loop wire. After this, the cutting height can be lowered step by step every week until the desired cutting height has been reached. 4.9.1 To adjust the cutting height 1. Press the STOP button to stop the product. 2. Open the hatch. 3. Turn the knob to the required position. • Turn clockwise to increase the cutting height. • Turn counter-clockwise to decrease the cutting height. 4. Close the hatch. 1220 - 001 - 08.07.2019 Operation - 37
4.9 Adjust the cutting height
The cutting height can be varied from MIN (2 cm /
0.8 in.) to MAX (6 cm / 2.4 in.).
CAUTION:
During the first weeks after
a new installation, the cutting height
must be set to MAX to avoid damaging
the loop wire. After this, the cutting
height can be lowered step by step
every week until the desired cutting
height has been reached.
4.9.1 To adjust the cutting height
1.
Press the
STOP
button to stop the product.
2.
Open the hatch.
3.
Turn the knob to the required position.
•
Turn clockwise to increase the cutting
height.
•
Turn counter-clockwise to decrease the
cutting height.
4.
Close the hatch.
1220 - 001 - 08.07.2019
Operation -
37