Icom IC-SAT100M Basic Manual eng/ger/esp/fra/ita - Page 10
BASIC OPERATION, Receiving and transmitting
View all Icom IC-SAT100M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2 BASIC OPERATION ■ Receiving and transmitting D Turning ON the transceiver z Hold down [VOL] for 1 second to turn ON the transceiver. • The transceiver searches a satellite. • When the transceiver connected and registered to the satellite, the status "IDLE," transceiver name, and Talkgroup name is displayed. L Push [Last Call] to playback the received call. (See the IC-SAT100M OPERATING MANUAL for Last Call Play function details.) L Push [UP] or [DOWN] to display the Talkgroup List. L Rotate Talkgroup selector to select a talkgroup. D Receiving When receiving, "LISTENING," and the source transceiver's name are displayed, and audio should be heard. L Rotate [VOL] to adjust the audio output level. LISTENING TRANSCEIVER2 TALKGROUP01 Last Call Ignore D Transmitting CAUTION: DO NOT transmit without an antenna. 1. Hold down [PTT]. L "REQUESTING" is displayed while the transceiver requests the transmission. 2. When "TALKING" is displayed, speak at your normal voice level. L You can continuously transmit up to the period of time allowed by the system. TALKING TRANSCEIVER1 TALKGROUP01 Last Call Scan NOTE: • If the connection becomes poor while transmitting, the transceiver sounds the beep "PuPu" in 1.5 second intervals. • You cannot transmit while listening to the received audio. Before transmitting, confirm the receiving is finished by the beep "Pi" and the display "OPEN." D Scan and Ignore [Scan] Push to scan a call. [Ignore] Push to ignore the received call. L The Ignore function will be canceled if there are no more calls for 90 seconds or more. NOTE: The transceiver receives and transmits using several satellites orbiting the same orbit. Receiving and transmitting may fail depending on the satellite position or any obstacles between the transceiver and satellites. 8° 9