Icom IC-SAT100M Basic Manual eng/ger/esp/fra/ita - Page 9

ENGLISH ■■ Function display 1 PANEL DESCRIPTION 1 2 1 00:00 Icon area 2 3 Text area Last call Scan Key display area LL The display is shown in English as an example. Select other languages on the Menu screen, if necessary. ([OK] > Display > Language) DDIcon Area RECORD Displayed when the Record function is ON. Indicators 1 SIGNAL STRENGTH Displays the relative receive signal strength level. NOTE: The antenna indicator " ˮ disappears if the connection with a satellite is not established. Keep the antenna vertical and wait until you are connected, or move your position to the place with a clear view of the sky. 2 CLOCK Displays the current time. SCAN ••Displayed when a scan is paused. ••Blinks while scanning. RX Speaker Displayed when the RX Speaker function is activated. DDText Area Displays the status, preset transceiver name, and selected Talkgroup Name. Status Description Icons The following icons are displayed in the Icon Area. LOCK Displayed when the Lock function is ON. SURVEILLANCE Displayed when the Surveillance function is ON. Bluetooth is displayed when Bluetooth is activated is displayed when a Bluetooth device is connected. IDLE The selected Talkgroup is not active. OPEN The selected talkgroup is active but no one is talking. REQUESTING Requesting the transmission. TALKING Transmitting LISTENING Receiving SCANNING Scanning a call BUSY Cannot transmit because the audio is being received. MESSAGE ••Displayed when a message has been received. ••Displayed if unread messages are still in the Message memory. DDKey Display Area Displays the names of the function assigned to [P1] and [P2]. 8