Intel SAI2 Product Specification - Page 34

Basic Input Output System (BIOS) SAI2 Server Board TPS Feature System Date Diskette A Diskette B Hard Disk Pre-Delay Primary Master Primary Slave Secondary Master Secondary Slave Choices or Display Description Only MM/DD/YYYY Sets the system date (month, day, year). Not Installed Selects the diskette type. 1.2 MB 5 ¼" 1.44 / 1.25 MB 3.5" 2.88 MB 3.5" Note: 1.25-MB, 3.5-inch references a 1024-byte/sector Japanese media format. To support this type of media format requires a 3.5-inch, 3-mode diskette drive. Disabled Selects the diskette type. 1.2 MB 5 ¼" 1.44 / 1.25 MB 3.5" 2.88 MB 3.5" Note: 1.25-MB, 3.5-inch references a 1024-byte/sector Japanese media format. To support this type of media format requires a 3.5-inch, 3-mode diskette drive. Disabled 3 Seconds Delays first access to disk to ensure the disk is initialized by the BIOS before any accesses. 6 Seconds 9 Seconds 12 Seconds 15 Seconds 21 Seconds 30 Seconds Displays IDE device selection. Enters submenu if selected. Displays IDE device selection. Enters submenu if selected. Displays IDE device selection. Enters submenu if selected. Displays IDE device selection. Enters submenu if selected. User Setting Table 8. Primary/Secondary Master and Slave Adapters Submenu Selections Feature Choices or Display Only Description Type Mult-Sector Transfers LBA Mode Control Auto None CD-ROM ATAPI Removable IDE Removable Other ATAPI User Disable 2 Sectors 4 Sectors 8 Sectors 16 Sectors Disabled Enabled Select the type of device that is attached to the IDE channel If User is selected, the user will need to enter the parameters of the IDE device (cylinders, heads and sectors). Specifies the number of sectors that are transferred per block during multiple sector transfers. Enable/Disable Logical Block Addressing instead of cylinder, head, sector addressing. User Setting 24 Revision 1.0